跳到内容 
Ducted PP Fume Hood Built to Contain Every Fume, Protect Every Technician
The Ducted PP Fume Hood from our YM Series delivers hospital-grade chemical containment for labs that can't afford a single failure. Acid-proof PP construction, microprocessor-controlled airflow, and a 5mm toughened-glass window — engineered so your team breathes easy, every single day.
Poor Fume Extraction Isn't a Small Risk — It's a Lab Liability
Corroded fittings, weak airflow, and cheap plastics fail exactly when you need protection most. A substandard fume hood puts your staff, your equipment, and your compliance record on the line.
Corrosive Damage
Standard metal fittings corrode within months of acid/alkali exposure — replacements you shouldn't need.
Weak Fume Capture
Underpowered blowers let vapors escape into the room instead of the exhaust duct.
Power-Failure Data Loss
Without memory function, a blackout resets your airflow settings and interrupts critical work.
Compliance Failure
Inconsistent air velocity means failed safety audits and non-compliant lab certifications.
Every Component Engineered for Zero-Compromise Safety
This is what makes the Ducted PP Fume Hood the trusted choice for chemical, pharmaceutical, and research laboratories worldwide.
Anti-Corrosive PP Water & Gas Taps
Standard metal taps corrode fast under chemical exposure — creating leaks and safety hazards. Our fume hood uses dedicated PP water and gas taps, built specifically to resist acid, alkali, and daily lab wear.
- Zero corrosion risk in acidic environments
- Leak-resistant sealing for long-term reliability
- Safer daily handling for lab technicians
Built-In Waterproof Sockets
Wet lab conditions and electrical outlets are a dangerous mix. Every fume hood ships with dual waterproof sockets rated for humid, chemical-heavy environments — so your equipment stays powered and your team stays protected.
- IP-rated splash and moisture protection
- 2 sockets included as standard accessory
- Reduces electrical hazard risk in wet zones
Integrated PP Acid & Alkali Resistant Sink
Rinse, dispose, and clean without ever leaving the containment zone. The built-in PP sink is molded from the same porcelain-white, corrosion-proof material as the hood body — engineered to handle strong acids and alkalis without pitting, staining, or degrading.
- Direct chemical drainage inside containment
- Resistant to staining and pitting
- Easy to clean, built to last for years
Microprocessor LED Display With Power-Failure Memory
Monitor and adjust airflow in real time from a clear LED interface. And if the power cuts out mid-experiment, the built-in memory function restores your exact settings the moment power returns — no lost calibration, no wasted time.
- Real-time airflow monitoring
- Automatic settings recovery after outages
- Adjustable speed blower control
5mm Toughened Glass Front Window
See everything, compromise nothing. The height-adjustable, acid/alkali-resistant 5mm toughened glass sash maximizes light and visibility while maintaining full containment — giving your team a bright, open, confident working view at all times.
- Maximum opening of 740mm
- Manual, height-adjustable sash
- Impact-resistant, chemical-safe glass
Full Technical Specifications — YM Series
Four sizes engineered to fit any laboratory footprint, from compact research benches to full production QC labs.
| Model | YM1000 | YM1200 | YM1500 | YM1800 |
|---|---|---|---|---|
| External Size (W×D×H) | 1047×800×2450mm | 1247×800×2450mm | 1547×800×2450mm | 1847×800×2450mm |
| Internal Size (W×D×H) | 787×560×700mm | 987×560×700mm | 1287×560×700mm | 1587×560×700mm |
| Work Surface Height | 820mm | |||
| Max Opening | 740mm | |||
| Air Velocity | 0.3–0.8 m/s | |||
| Noise Level | ≤ 68dB | |||
| Exhaust Duct | 5 meters, Φ250mm | |||
| LED Lamp | 9W × 2 | 12W × 2 | 15W × 2 | 20W × 2 |
| Blower | Built-in PP centrifugal blower (2 blowers for YM1800), speed adjustable | |||
| Front Window | Acid/alkali resistant, manual, 5mm toughened glass, height adjustable | |||
| Power Supply | AC220V ±10%, 50/60Hz | 110V ±10%, 60Hz | |||
| Power Consumption | 400W | 400W | 500W | 700W |
| Main Body Material | Porcelain white PP, 8mm thick, resistant to strong acid, alkali & corrosion | |||
| Work Table | Chemical-resistant phenolic resin | |||
| Gross Weight (Main Body) | 137kg | 155kg | 180kg | 206kg |
| Gross Weight (Base Cabinet) | 89kg / 80kg (splicable) | 99kg / 90kg (splicable) | 114kg / 102kg (splicable) | 140kg |
| Package Size (Main Body) | 1188×938×1612mm | 1388×938×1612mm | 1688×938×1612mm | 1988×938×1612mm |
Everything Included — Nothing Left to Source Separately
Every Ducted PP Fume Hood ships complete and ready to install.
💡 LED Lighting & Work Table
Full LED illumination plus chemical-resistant phenolic resin work table included as standard.
🔌 Power & Sockets
RVV power cord, 2× waterproof sockets, and base cabinet included for immediate setup.
🚰 Water & Gas Fittings
PP water tap, PP gas tap, and integrated water sink — all pre-installed.
🌀 PVC Exhaust Duct
5-meter PVC duct (Φ250mm), plus pipe straps and tail insert included.
🌬️ PP Centrifugal Blower
1 built-in blower standard (2 for YM1800), speed adjustable for precise airflow control.
⚙️ Optional Upgrades
Epoxy resin or ceramic work tables, outer blowers, and splicable base cabinets available.
4
Sizes Available (YM1000–YM1800)
0.3–0.8
m/s Controlled Air Velocity
≤68dB
Whisper-Quiet Operation
8mm
Acid & Alkali Resistant PP Body
Don't Risk Your Lab on a Weaker Fume Hood — Get the YM Series Today
Every day you wait with substandard extraction is another day of unnecessary chemical exposure risk. Talk to our team now and get a tailored quotation, technical drawing, and shipping estimate for your lab.
Get My Free Fume Hood Quote No obligation · Response within 24 hours · Trusted by labs worldwide