跳到内容 
Cleanroom Hand Washing Station — Wash, Sanitize & Dry Hands Without Touching a Thing
A fully automatic, hands-free cleanroom hand washing station that removes particles, bacteria and moisture from hands and gloves in seconds — engineered for pharmaceutical, electronics, food and GMP production entrances.
- 100% hands-free — infrared sensor operation, zero cross-contamination
- Class 100 @ 0.3 μm filtered air — 99.99% filtration efficiency
- PLC-programmable wash and dry cycles, custom-built to your line
Hands-Free Cleanroom Hand Washing Station Every Touchpoint at Your Cleanroom Entrance Is a Contamination Risk
Manual taps, shared soap dispensers and paper towels reintroduce particles the second your team steps toward the gowning room. An automatic hand washing & drying machine closes that gap — washing, sanitizing and drying hands in one uninterrupted, touch-free cycle before anyone crosses the clean-to-dirty line.
Stops Contamination at the Door
Filtered water and Class 100 filtered air mean nothing but clean, dry hands enter your controlled environment.
Cuts Gowning-Line Wait Time
18–28 second dry cycles keep two- and three-station lines moving instead of queuing at a shared sink.
Built for Audits
PLC-controlled fixed wash-then-dry sequencing gives you a documented, repeatable process for GMP and ISO inspections.
One Machine. A Complete Automatic Hand Washing Station.
Compact, Clean-Looking, Ready for Inspection
A slim footprint with a lit mirror above the basin lets personnel check gowning before they walk the line — no separate mirror station required.
- Double-layer stainless steel basin with sound-damping core
- Ergonomic basin profile prevents splashback onto garments
- Illuminated decorative mirror housing built in
Fully Automatic, Sensor-Driven Cycle
An infrared sensor detects hands at up to 25 cm, triggers the gooseneck faucet, then hands off to a stainless steel warm-air outlet — no buttons, no cross-contact, no guesswork.
- Wash timer adjustable 0–99 seconds
- Dry timer adjustable 0–99 seconds, ≥15 m/s airflow at 48℃ ± 3℃
- Fixed wash-then-dry sequence for consistent SOP compliance
Sterile, Particle-Free by Design
Every drop of wash water runs through a water filter; every burst of drying air runs through an ultra-high-efficiency filter — so this GMP hand washing station delivers Class 100 @ 0.3 μm results at 99.99% filtration efficiency.
- Filtered water supply and filtered, heated drying air
- Noise-suppressed housing — 65 dB ± 5 dB average
- Cold-rolled painted steel or 304 stainless steel body options
How the Cleanroom Hand Washing & Drying System Works
Sense & Wash
Hands enter the sensing zone (≤25 cm) and the gooseneck faucet starts filtered water automatically. Soap and sanitizer dispense hands-free.
Auto Stop
Once the pre-set wash timer completes, water supply cuts off instantly — no valves to close, nothing to touch.
Filtered Dry
The stainless steel outlet blows Class 100 filtered, warm air at ≥15 m/s until the drying timer ends — hands dry, gowning-ready.
Specifications
| Parameter | Value |
|---|---|
| External Dimensions | 580 × 580 × 1760 mm / 1160 × 580 × 1760 mm |
| Drying Air Velocity | ≥ 15 m/s |
| Outlet Air Temperature | 48℃ ± 3℃ |
| Drying Time | 18–28 s |
| Average Noise | 65 dB ± 5 dB |
| Filtration Efficiency | Class 100 @ 0.3 μm — 99.99% |
| Water Supply Mode | Automatic inductive water supply |
| Air Outlet Mode | Automatic inductive air delivery |
| Power Supply | 380V 50Hz / 2 kW; 380V 50Hz / 4 kW |
| Body Material | Cold-rolled steel plate with paint / 304 stainless steel |
| Sink Length | 1500 mm (2-station) / 1900 mm (3-station) |
Configurations to Match Your Line
Two, three or multi-station automatic hand sanitizing station layouts, plus optional foot-, knee- or infrared sensor-operated controls for surgical and high-containment areas.
Leg-Operated Sink for Operating Departments
A mechanical, knee/leg-operated valve for surgical and operating-department settings where a manual backup to sensor control is preferred.
Infrared Sensor-Activated Sink
Fully hands-free infrared sensor control for wards, cleanrooms and GMP entrances — no contact with taps or valves at any point in the cycle.
Hands-Free Multi-Station
Fully sensor-driven, wide basins for simultaneous multi-station use — built for high-throughput gowning rooms.
| Product Model | Leg-Operated Handwashing Sink for Operating Departments | Infrared Sensor-Activated Handwashing Sink |
|---|---|---|
| Two-Station Size | 1600 × 650 × 900 mm | 1600 × 650 × 900 mm |
| Three-Station Size | 2400 × 650 × 900 mm | 2400 × 650 × 900 mm |
| Four-Station Size | 2800 × 650 × 900 mm | 2800 × 650 × 900 mm |
| Optional Accessories | Medical handwashing brush (high-temperature & high-pressure sterilization) · Medical handwashing brush (with nail brush) | |
Trusted Across Regulated & Cleanroom Industries
Used as a pharmaceutical hand washing system and general cleanroom gowning-entry solution wherever hand hygiene protects the product, not just the person.
Frequently Asked Questions
🔹 Is this hand washing station truly hands-free?
Yes. Infrared sensors detect hands within 25 cm and automatically start water flow, then hand off to filtered warm-air drying — no buttons or manual controls involved in the standard sensor mode.
🔹 Can the wash and dry times be adjusted?
Both cycles are independently adjustable from 0 to 99 seconds via the PLC control program, so you can match timing to your SOP without changing hardware.
🔹 What filtration level does the drying air reach?
The air passes through an ultra-high-efficiency filter rated Class 100 @ 0.3 μm with 99.99% filtration efficiency, suitable for cleanroom and GMP entry points.
🔹 Can I get a knee- or foot-operated version?
Yes, knee-operated and foot-operated sink options are available as add-ons, commonly specified for surgical and high-containment areas.
🔹 What sizes and station counts are available?
Standard external dimensions are 580×580×1760 mm (single) or 1160×580×1760 mm (multi-unit), with 1500 mm sinks for 2-station and 1900 mm sinks for 3-station configurations. The Leg-Operated and Infrared Sensor-Activated sink models are also available at 1600×650×900 mm (2-station), 2400×650×900 mm (3-station) and 2800×650×900 mm (4-station). Custom, non-standard sizing and station counts are also available.
🔹 What accessories are available for the sink models?
Both the Leg-Operated and Infrared Sensor-Activated sink models can be fitted with an optional medical handwashing brush — available in a high-temperature & high-pressure sterilization version, or a version with an integrated nail brush.
🔹 Do you support custom or OEM development?
Yes, we accept custom product development, prototyping, and both small-batch and mass production runs to match your facility's exact specification.
Ready for a Cleaner, Faster Gowning Line?
Tell us your station count, room layout and industry — our engineers will recommend the right automatic hygienic hand washing station configuration and send a formal quote.